|
|
| |
|
Number Machine - Sample Formats
|
|
|
|
With Auction Cards the idea is to get the numerals as large
as possible so the Auctioneer at the front of the room can
make out the numbers without squinting too much.
Pictured to the left is an Auction Card being run 2-up. The
finished size will be 5-1/2 x 8-1/2 after cutting in two
from the 8-1/2 x 11 card.
|
|
Remember: With Number Machine you can print numbers as
large as your printer can handle and it will print on paper as
large as your printer will feed.
Set The Heads
In our example we need 2 numbering heads. I placed them .5 of an
inch from the left and .5 of an inch from the top. We only want
2 characters showing. The preface is (none).
Select A Font
Most fonts were designed for smaller text and not big display so
they are usuallly quite wide. If you want large tall numerals you
should select a condensed face.
Even though font point sizes only go up to 72 using the pull down
control, you can type in whatever point size you desire. 400 point
is a good starting number. You can adjust as necessary from there.
Select The Numbers
We are going to make a set of 100 cards. Because we are running
them 2-up we only need 50 sheets of card stock. Select the starting
number as 1 and ending at 50. That takes care of the numbers for
numbering head position 1. To make numbering head position 2 count
from 51 to 100 type 50 in the Add To First Number column of position
2. This tells the computer to add 50 on to whatever is being printed
in position 1.
Save The Format
Once you get the settings just the way you want them, pull down on
the File Menu and save your format. This ensures that the next time
you wish to print Auction Cards you only need to load the format
and run.
|
|
|
VOLUME DISCOUNT:
Order any 3 items and receive 10% off your order.
Order any 7 items and receive 20% off your order.
Order any 11 items and receive 30% off your order.
|
|
|
| |
|
|
|
|
